Manufacturer: RigExpert Ukraine
Availability: OUT OF STOCK
Warranty: 2 years
The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
The following tasks are easily accomplished by using this analyzer:
Warranty coverage by the RigExpertCare™
Frequency range: 0.1 to 230 MHz
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems
SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
R and X range: 0…10000, -10000…10000
Bluetooth: v.4.2 BLE Single-mode, Class B
Dimensions: 185 mm x 40 mm x 33 mm (7,3 in x 1,6 in x 1,3 in)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 185 g (6,5 Oz) with battery
Warranty: 2 years
RigExpert Stick is made in Ukraine.
*All specifications are subject to change without notice or obligation.
AntScope is a program which is shipped with every RigExpert antenna analyzer. You may also download the latest version from the Downloads page of the RigExpert website (the program is included in installation CD packages). The screenshots listed below illustrate how capable this program is when the analyzer is connected to a PC. SWR (Standing Wave Ratio) plot:
R (resistance), X (reactance) and Z (module of impedance) display, series mode:
R (resistance), X (reactance) and Z (module of impedance) display, parallel mode:
Time Domain Reflectometer mode (except AA-500 and AA-520):
|Function||AA-35 ZOOM||AA-55 ZOOM||Stick 230||Stick Pro||AA-230 ZOOM||AA-600||AA-650 ZOOM||AA-1000||AA-1400||AA-1500 ZOOM||AA-2000 ZOOM|
|Frequency range||0.06-35 MHz||0.06-55 MHz||0.1-230 MHz||0.1-600 MHz||0.1-230 MHz||0.1-600 MH||0.1-650 MHz||0.1-1000 MHz||0.1-1400 MHz||0.1-1500 MHz||0.1-2000 MHz|
|Frequency entry step size||1 kHz|
|Min. sweep range||10 kHz||1 kHz||10 kHz||1 kHz||10 kHz||1 kHz|
|Reactance sign measurement||+|
|Antenna connector type||UHF (SO-239)||type N|
|Output power||+13 dBm||-10 dBm|
|Output amplifier||CMOS logic chip|
|Output signal shape||square|
|Reference impedance for SWR measurement||50, 75 Ohm||25, 50, 75, 100, 150, 200, 300, 450, 600 Ohm|| 25, 50, 75, 100, 150,|
200, 300, 450, 600 Ohm
|25, 50, 75, 100, 150, 200, 300, 450, 600 Ohm||50, 75 Ohm||25, 50, 75, 100 Ohm||25, 50, 75, 100, 150, 200, 300, 450, 600 Ohm||25, 50, 75, 100 Ohm||25, 50, 75, 100, 150, 200, 300, 450, 600 Ohm|
|Battery voltage sensor||+|
|Operation with external power supply (without battery)||from USB|
|LCD||Color TFT 320×240||200×200 monochrome e-paper display||200×200 color TFT display||Color TFT, 290×220||Color TFT, 320×240||400×800 BlanView display|
|Time Domain Reflectometer mode||– *||Built-in||– *||Built-in|
|Flash memory for storing graphs||–||10 memory slots||–||90 R/X or SWR memory slots, 10 TDR memory slots||10 memory slots||90 R/X or SWR memory slots, 10 TDR memory slots|
|Multilingual support||English only||+||English only||+|
|Presets for radio amateur bands||–||+|
|AA-35 ZOOM||AA-55 ZOOM||Stick 230||Stick Pro||AA-230 ZOOM||AA-600||AA-650 ZOOM||AA-1000||AA-1400||AA-1500 ZOOM||AA-2000 ZOOM|
Make sure the latest firmware is uploaded to the analyzer.
* The AntScope software is able to plot graphs in Time Domain Reflectometer (TDR) mode when AA-30/AA-54/AA-170 is connected to the computer. Since the resolution of the TDR graph is proportional to the maximum operating frequency of an analyzer, much better results are obtained by using AA-230 ZOOM, AA-600, AA-1000 or AA-1400.
The device which has stopped functioning due to factory defects within the Warranty period will be replaced by a new one in a very few days instead of waiting when it’d be fixed. Just contact the RigExpertCare™ partner to get such a great support!
RigExpertCare™ is the 2-years limited warranty coverage for RigExpert™ products.
RigExpertCare™ means that the Rig Expert Ukraine will replace defective goods covered by the Warranty with the new goods of the same model as soon as possible.
The warranty is non-transferable. Only the original customer is covered under the RigExpertCare™ warranty.
In rare cases, when warranty repair is required, the RigExpertCare™ partner may require confirmation of an official purchase (for example, purchase receipt etc.)
The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.
The warranty does not cover any events including but not limited to:
Customers are responsible for shipping costs to ship back the defective item for RMA repair/replace.
Once the faulty item is received by RigExpertCare™ partner a new replaced item will be shipped back to the customer.
Shipping methods will be at Rig Expert’s discretion.
Therefore, RigExpertCare™ partner reserves the rights to ship according to what it deems the most efficient standard method of shipping.
Rig Expert Ukraine Ltd. can repair defective goods at the Customer’s request. To get a warranty repair please contact your original seller.