Model: KK-HYP 5
Manufacturer: Messi & Paoloni, Italy
Availability: OUT OF STOCK
(5.4 mm / 0.212 inch cable)
A new breakthrough in the market standards! The new international reference point for attenuations, flexibility and screening efficiency for all 5.4mm/0.212” cables!
Best in its class for:
perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).
New improved dielectric:
outstanding attenuations up to 6 Ghz, even better than some solid core cables of the competition.
>105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 120 wires, (88% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. Moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS.
4,4 Kg/100 m for a reduced stress of the “hanging and swinging” stretch of the cable in rotor operated antennas.
Excellent Power Handling!
The external PVC jacket is in black UV resistant PVC. Useful hint: the PVC used for the jacket of the cables, makes them extremely flexible but it’s not suitable for underground laying. Every cable can be made with PE jacket, on specific request and for reasonable quantities in order to make them buriable.
We are very proud of this achievement for the Ham Radio world!
|0,3-600 MHz||>28 dB|
|600-1200 MHz||>25 dB|
|1200-2000 MHz||>22 dB|
|ATTENUATION at 20°C/68°F|
|POWER HANDLING (at 40°C/104°F)|
|1,8 MHz||1274 W||400 MHz 115 W|
|3,5 MHz||987 W||430 MHz 111 W|
|7,0 MHz||809 W||800 MHz 80 W|
|10 MHz||717 W||1000 MHz 71 W|
|14 MHz||620 W||1296 MHz 62 W|
|21 MHz||518 W||2400 MHz 44 W|
|28 MHz||453 W||3000 MHz 39 W|
|50 MHz||338 W||4000 MHz 33 W|
|100 MHz||235 W||5000 MHz 29 W|
|144 MHz||195 W||6000 MHz 26 W|
|200 MHz||165 W|
|Impedance @200MHz :||50 Ohm ± 3|
|Minimum bending radius:|
|Multiple bends/single bend:||50/25 mm (1.97/0.98 in)|
|Temperature:||-45°C to + 70°C (-49°F to +158°F)|
|Capacitance:||74 pF/m ± 2 (22.6 pF/ft ± 2)|
|Velocity ratio:||87 %|
|Screening efficiency:||100-2000 MHz >105 dB|
|Inner conductor resistance:||14 Ohm/Km (4.3 Ohm/1000ft)|
|Outer conductor resistance:||11 Ohm/Km (3.4 Ohm/1000ft)|
|Tension test (spark test):||4 kV|
|Weight (100m/100ft):||4,2 Kg (9.25 lb)|
|Maximum peak power:||2900 WATT|
|Connectors:||C.N.HF5M-S ; C.BNC.AC5M-S ; C.UHF.AC5M-S|
Given a power fed to the X value (any value expressed in Watts), the actual power output of the cable is shown in the table in the form of the remaining percentage. (for example, if we use a cable such as M&P-HYPERFLEX 5, entering 1000 Watts over a length of 35m, at a frequency of 144 MHz, there remains 45,8 % of 1000). For maximum applicable power, see the Power Handling of the cable concerned. From these values, have already been deducted the SRL values, typical of each one of our models, for the respective frequencies. REMEMBER: Make sure to match the line accurately!
|Connector UHF Spezial/6|
|Connector PL 22 TG|
|Connector N 155 TA|
|Connector N22-155 TA|
|Connector BNC 58-155 TG|