Model: KK-HIGH 7
Manufacturer: Messi & Paoloni, Italy
Availability: OUT OF STOCK
(7.3 mm / 0.287 inch cable)
WRTC 2018 OFFICIAL CABLE FOR THE WORLD RADIO TEAM CHAMPIONSHIP IN GERMANY!
perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).
New improved dielectric:
outstanding attenuations up to 8 Ghz, even better than some solid core cables of the competition.
>105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 144 wires, (83% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. Moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS.
6,9 Kg/100 m instead of 13,8 Kg of our RG 213/U, for a reduced stress of the “hanging and swinging” stretch of the cable in rotor operated antennas.
Excellent Power Handling!
The external PVC jacket is black UV resistant PVC. Useful hint: the PVC used for the jacket of the cables, makes them extremely flexible but it’s not suitable for underground laying. Every cable can be made with PE jacket, on specific request and for reasonable quantities in order to make them buriable.
This cable delivers exceptional mechanical features and electrical properties. Notwithstanding its small dimension (7,3 mm) its performances are so good to outperform RG 213/U (10,2 mm) and put into shade the competitor cables of the same diameter.
M&P HIGHFLEXX 7 is without any doubt one of our BEST SELLERS around the world!
Given a power fed to the X value (any value expressed in Watts), the actual power output of the cable is shown in the table in the form of remaining percentage. (for example, if we use a cable such as M&P-HIGHFLEXX 7, entering 1000 Watts over a length of 35m, at a frequency of 144 MHz, there remains 57,3% of 1000). For maximum applicable power, see the Power Handling of the cable concerned. From these values, have already been deducted the SRL values, typical of each one of our models, for the respective frequencies. REMEMBER: Make sure to match the line accurately!
|Connector PL-7 Clamp|
|Connector PL22-7 TG|
|Connector UG 21/7 TA|
|Connector UG 22-7 TA|
|Connector BNC 7|
|Connector BNC 22-7 TG|